Effect of preparation method on the mechanism for oxidation of C/C-BN composites

C/C-BN composites and C_f/BN/PyC composites exhibiting different structures for pyrolytic carbon (PyC) and boron nitride (BN) were studied comparatively to determine their oxidation behavior. This study used five types of samples. Porous C/C composites were modified with silane coupling agents (APS) and then fully impregnated in water-based slurry of hexagonal boron nitride (h-BN); the resulting C/C-BN preforms were densified by depositing PyC by chemical vapor infiltration (CVI), resulting in three types of C/C-BN composites. The other two C_f/BN/PyC composites were obtained by depositing a BN interphase and PyC in carbon fiber preforms by CVI; one was treated with heat, and the other was not. This study was focused on determining how the PyC deposition mechanism, morphology and pore structure were affected by the method of BN introduction. In the 600–900 °C temperature range, the C_f/BN/PyC composites and C/C composites underwent oxidation via a mixed diffusion/reaction mode. The C/C-BN composites had a different pore structure due to the formation of nodules comprising h-BN particles; both interfacial debonding and cracking were reduced, resulting in higher resistance to gas diffusion, lower oxidation rate and larger activation energy (Ea) in the temperature range 600–800 °C. In addition, the mechanism for oxidation of C/C-BN composites gradually exhibited diffusion control at 800–900 °C because the formation of h-BN oxidation products healed the defects. The oxidation mechanism was more dependent on pore structure than on BN structure or content.     

Preparation and characterization of fully waste-based glass-ceramics from incineration fly ash,waste glass and coal fly ash

Municipal solid waste incineration (MSWI) fly ash (FA) is a typical hazardous waste due to its high contents of toxic heavy metals, and hence its disposal has attracted global concern. In this work, it was recycled into environmental-friendly CaO–Al₂O₃–SiO₂ system glass-ceramics via adding coal fly ash (CFA) and waste glass (WG). The effects of CaO/SiO₂ ratios and sintering temperatures on the crystalline phases, morphologies, mechanical and chemical properties, heavy metals leaching and potential ecological risks of glass-ceramics were investigated. The results showed that wollastonite (CaSiO₃), anorthite (CaAl₂Si₂O₈) and gehlenite (Ca₂Al₂SiO₇) were the dominant crystals in the glass-ceramics, which were not affected by CaO/SiO₂ ratio and sintering temperature. The compressive strength increased, while the Vickers hardness and microhardness decreased as increasing the sintering temperatures from 850 to 1050 °C, which reached their maximum values of 660.69 MPa, 6.14 GPa, and 7.43 GPa, respectively. However, the increase of CaO/SiO₂ ratio resulted into the reduction of the three mechanical parameters. As varying CaO/SiO₂ ratio from 0.48 to 0.86, the maximum compressive strength, Vickers hardness and microhardness were 611.80 MPa, 5.43 GPa, and 6.56 GPa, respectively. Besides, all the glass-ceramics exhibited high alkali resistance of >97%. The extremely low heavy metals leaching concentrations and low potential ecological risk of glass-ceramics further revealed its environmentally friendly property and potential application feasibility.     

Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

A comparative study on pyrolysis reactivity and gas release characteristics of biomass and coal using TG-MS analysis

Pyrolysis reactivity and gas release characteristics of biomass and coals were comparatively investigated using TG-MS. In addition, chemical compositions and structures of tested samples were determined to correlate pyrolysis gas release characteristic. It was found that pyrolysis reactivity and gaseous product release were hardly varied with pyrolysis heating rate. Furthermore, pyrolysis rates of two biomass samples were greater than those of coals, which were mainly attributed to the chemical compositions and the gaseous product evolution process. The result also showed that gaseous product release during pyrolysis process was related to the presence of different functional groups in samples.     

基于大数据的五年制高职护生在线学习行为要素研究

在线学习已逐渐成为高职院校一种重要学习形式,该领域也成为当前研究热点之一。对在线学习进行介绍,同时对大数据技术在在线学习平台中的应用进行分析,重点对五年制高职护生在线学习行为要素进行研究分析,为更好地开展在线学习评价提供参考,促进高职院校更好地开展在线学习,提高在线学习质量。     

低活化马氏体钢热变形行为及机理型本构建模研究

利用Gleeble-3500热模拟试验机研究了低活化马氏体钢在变形温度为850～950 ℃、应变速率为0.001～1 s^-1条件下的热变形行为。建立了流变应力本构方程，并评估了该方程的预测能力。绘制了低活化马氏体钢在不同应变下的热加工图。结果表明：在较高的应变速率条件下，该材料主要发生动态回复，在较高变形温度和较低应变速率下具有明显的动态再结晶特征；本构方程的预测结果与实验结果符合良好；变形温度870～930 ℃、应变速率0.001～0.01 s^-1和变形温度920～950 ℃、应变速率0.3～1 s^-1分别是真应变为0.4和0.6下最优的热加工区域。     

基于大数据挖掘的用电行为分析

得益于智能电网的发展,电力大数据的价值与作用逐渐被挖掘。通过对电力大数据的深入挖掘与研究,可促进电网企业管理水平的进一步提升,为我国智能电网的发展提供助力。而依托于大数据挖掘的用户用电行为分析,可实现当前企业电网调控与需求侧的充分融合,为电力系统的稳定性运行提供保障。基于此,文章针对大数据挖掘的用电行为分析进行深入探析,以期为智能电网发展提供帮助。     

Human action recognition toward massive-scale sport sceneries based on deep multi-model feature fusion

In sport sceneries, automatically recognizing human actions is a useful technique that can be popularly applied in may domains, such as human body tracking and athlete behavior analysis Most state-of-the-art deep architectures have achieved competitive performance in recognizing human action. However, it is still a challenging task due to the unavoidable occlusion, camera angle changes, and varied human posture. In this paper, we propose a novel deep multimodal feature fusion algorithm for human action recognition. The key technique is a multi-model feature fusion scheme. More specifically, we fuse visual feature, skeleton posture, probability maps and audio signal into a hybrid feature, which is utilized to represent human action. Then these feature channels are optimally combined using a deep model, wherein the weights of multiple feature channels can be predicted intelligently. Finally, the optimally fused feature are fed into a multi-class SVM for conducting human action recognition. Extensive comparative results and parameter analysis have shown the effectiveness of our proposed method.     

Compressive and flexural properties of novel polylactic acid/hydroxyapatite/yttria-stabilized zirconia hybrid nanocomposite scaffold

The mechanical property is a crucial factor in the design of bone tissue engineering scaffolds. In the current study, novel PLLA (Poly-L-lactic acid)–Hydroxyapatite (HA)–yttria-stabilized zirconia (YSZ) nanocomposite scaffold with various compositions was prepared and characterized. The effect of HA and YSZ contents on the mechanical behavior of the resultant composites was investigated. TEM micrograph revealed that HA particles are needle-like in shape and nano in size. Scanning electron microscopy (SEM) micrograph also showed that YSZ powder is in granule form and submicron size. SEM disclosed that all scaffolds had a highly interconnected porous structure and X-ray diffractometry revealed that there were some molecular interactions between PLA (Polylactic acid), HA, and YSZ in the composites. The results depicted that introducing YSZ to the nanocomposite leads to a significant increase in compressive strength, modulus, and densification strain. In addition, flexural strength and modulus showed an upward trend by adding YSZ particles to scaffolds. It should be noted that PLA–20%HA–20%YSZ indicates the highest strength and modulus in both compression and bending tests, though, it did not demonstrate the proper strain compared to other scaffolds. Thus, PLA–15%HA–15%YSZ has been reported as the best candidate due to appropriate strength and strain. Also, energy absorption in nanocomposites showed an upward trend by increasing the amount of YSZ particles. It was found that the strength of samples was declined after being soaked in simulated body fluid. However, scaffolds with HA underwent more decrease in strength compared to samples containing YSZ.     

Short communication: The effect of diarrhea and navel inflammation on the lying behavior of veal calves

Many veal calves arrive to growing facilities with diseases, including diarrhea and navel inflammation. Observing neonatal calf behavior, such as lying behavior, can be used to better detect and determine the implications of these diseases. The aim of this study was to determine the effect of navel inflammation and diarrhea on lying behavior in neonatal veal calves. This study was part of a larger experiment that included a total of 360 male Holstein calves from 3 cohorts; from these calves, we selected a subset of 125 calves (every third calf as they entered the barn) to be fitted with 3-dimensional accelerometers (Hobo Pendant G data loggers; Onset Computer Corp., Bourne, MA) on 1 hind leg to continuously measure lying time, number of lying bouts, and lying bout duration. Calves were housed individually on slatted flooring (Tenderfoot; Tandem Products Inc., Minneapolis, MN) in 3 rooms of a mechanically ventilated barn. Health exams were conducted twice weekly for 2 wk starting the day after arrival. Exams included rectal temperature, navel score (0 = normal, 1 = mildly inflamed, 2 = moderately inflamed, 3 = severely inflamed), and fecal score (0 = normal, 1 = semiformed, 2 = loose, 3 = watery). Calves were considered to have navel inflammation (n = 22) or diarrhea (n = 15) if they scored ≥2 during at least 3 of the 4 health exams. The lying behavior of these calves was compared with that of normal calves (n = 18) that had no signs of illness and rectal temperatures <39.4°C during at least 3 of the 4 health exams. Data were analyzed using a repeated-measures ANOVA; models included cohort (1, 2, or 3), health status (normal, navel inflammation, or diarrhea), week (1 or 2), and a health by week interaction. There was an effect of health status on lying time, whereby normal calves spent more time lying compared with calves with inflamed navels and tended to spend more time lying compared with calves with diarrhea. There was no effect of health status on the number of lying bouts per day or on the duration of lying bouts. There were no health by week interactions. Results indicate that neonatal veal calves with navel inflammation and diarrhea may be less comfortable than calves without these conditions. Veal producers should consider adapting their facilities to create more comfortable lying environments to help calves better recover from disease, such as by adding a hospital pen with comfortable bedding.